How to Cut PVC Pipe

by wpx_admin
Updated on

In this post, we’ll show you how to cut PVC pipe in four simple steps. With the right tools and a little practice, you’ll be able to cut PVC like a pro in no time!

Checkout this video:


PVC pipe is a type of plastic piping used for various residential and commercial applications. PVC is available in a variety of sizes and thicknesses, and it can be cut with a standard hand-held hacksaw or power saw. However, cutting larger diameter pipe may require the use of a power saw or special cutting tools.

Tools You Will Need

To cut PVC pipe, you will need a few tools. First, you will need a saw. A handsaw will work, but a power saw will make the job easier. Second, you will need a measuring tape and a pencil to mark the pipe where you will make your cut. Third, you will need a file or rasp to smooth out the edges of the pipe after you have made your cut. Finally, you will need PVC glue and primer to join the two pieces of pipe together.

Cutting the PVC Pipe

PVC pipe is one of the most versatile materials available for home improvement and repair projects. It can be cut with a variety of power and hand tools, but the most important tool you’ll need is a hacksaw. Here’s how to go about it:

1. Start by measuring the length of PVC pipe you’ll need for your project.

2. Place the hacksaw blade on the mark you made, making sure that the teeth of the blade are pointing away from you.

3. Apply pressure to the handle of the hacksaw to start cutting through the PVC pipe.

4. Continue cutting until you’ve made it all the way through the pipe.

5. Use a file or sandpaper to smooth away any burrs on the edges of the pipe.

Deburring the PVC Pipe

After you have cut your PVC pipe to the desired length, it is important to remove any sharp edges from the end of the pipe. This process is called deburring, and there are a few different ways that you can do it.

One way is to use a rat tail file. A rat tail file is a tapered file that is designed for getting into tight spaces. To deburr your PVC pipe with a rat tail file, simply insert the tip of the file into the end of the pipe and twist it around until all of the sharp edges have been removed.

Another way to deburr PVC pipe is to use a power drill with a sanding attachment. This method is quicker than using a rat tail file, but it does require access to a power drill. To deburr your pipe with a power drill, simply attach a sanding attachment to the drill and sand away any sharp edges from the end of the pipe.

PVC pipe can also be deburred using a handheld rotary tool, such as a Dremel. To deburr your PVC pipe with a rotary tool, simply spin the tool while holding it against the end of the pipe until all of the sharp edges have been removed.

After you have deburred your PVC pipe, it is important to clean up any dust or debris that has been created in order to avoid clogging your pipes. The best way to do this is to blow out the end of the pipe with compressed air or use a vacuum cleaner with an attachment designed for cleaning small spaces.


Now that you know the different types of saws and how to use them, you’re ready to cut your PVC pipe. Be sure to always wear safety gear, including gloves and eye protection, when working with power tools. Always cut in a well-ventilated area, and make sure your PVC pipe is clamped down securely before cutting. With a little practice, you’ll be able to cut PVC like a pro!


Use a dynamic headline element to output the post author description. You can also use a dynamic image element to output the author's avatar on the right.

Leave a Comment