How to Cut LED Strips for Your Next Project

by wpx_admin
Updated on

If you’re looking for a quick and easy guide on how to cut LED strips for your next project, look no further! This guide will show you everything you need to know about cutting LED strips so that you can get started on your project as soon as possible.

Checkout this video:


We’ll show you how to cut LED strips to length for your next project. Whether you’re looking to add accent lighting to a bookshelf or under-cabinet lighting in your kitchen, cutting your own LED strips will give you the perfect fit every time.

What You’ll Need

-LED strips
-Tape measure or ruler

1. Measure the length you need for your project and cut the LED strip to size using scissors.
2. If you need to create a custom shape or design, use a sharp object like a knife to score along the cutting line before snapping the strip apart.
3. To create a 90-degree angle, gently bend the strip back and forth until it snaps apart. You can also use blunt scissors or wire cutters to make a clean cut.

Measuring and Cutting Your LED Strips

To get started, you’ll need to measure the area where you’ll be installing your LED strip lights. Once you have your measurements, you can start cutting your LED strips to size.

Most LED strips come with a pair of scissors marked at the correct cutting points. Simply line up the scissors at your desired cut point and give them a squeeze to make a clean cut.

If your LED strip doesn’t have built-in scissors, you can use a sharp knife or utility knife to make your cut. Just be sure to use a cutting board or other hard surface to protect your work surface from damage.

Once you’ve cut your LED strip to size, it’s time to finish installation by soldering on the appropriate connector. If you’re not sure how to do this, check out our handy guide on How to Solder LED Strip Lights.

Connecting Your LED Strips

If you’re looking to add some extra light to your next project, LED strips are a great way to do it. But before you can enjoy the benefits of LED lighting, you need to know how to cut LED strips.

Cutting LED strips is actually pretty easy. The first thing you need to do is make sure you have the right tools. You’ll need a sharp blade and a straight edge. A pair of scissors will work in a pinch, but a utility knife will give you cleaner, straighter cuts.

Once you have your tools, follow these steps:

1.Measure the length of strip you need and mark it with a pencil or pen.
2.Use your straight edge to guide your blade as you cut through the strip.
3.Be careful not to cut through any of the individual LEDs. If you do, the strip won’t work properly.
4.Once you’ve cut the strip, peel off the adhesive backing and stick it in place.

And that’s all there is to it! With these simple steps, you can easily add LED lighting to any project.


Now that you know how to cut LED strips, you can customize them for any project. Remember to measure twice and cut once, and be careful not to damage the LEDs or strip while cutting. With a little practice, you’ll be an expert at cutting LED strips in no time.


Use a dynamic headline element to output the post author description. You can also use a dynamic image element to output the author's avatar on the right.

Leave a Comment